How To Put A Bike Chain Back On?

If you’re like me, you love taking your bike for a spin during the summer. However, if you’re not careful, you might find yourself in a bit of a pickle when it comes time to put your bike chain back on.

To put a bike chain back on start by placing the chain around the largest cog in the back. Then, thread it up through the rear derailleur. 

Bring the chain around the front, and thread it through the derailleur cage. Now, place the chain around the small cog in the front. And finally, thread it back through the rear derailleur cage and you’re all set!

What Do You Need To Put A Bike Chain Back On?

How To Put A Bike Chain Back On

The things you may need to put a bike chain back on are:

  1. A bike chain
  2. A bike chain tool
  3. Or a multi-tool with a chain tool attachment

First, you’ll need to remove the old chain. To do this, you’ll need a chain tool (or a multi-tool with a chain tool attachment).

Once the old chain is removed, clean the area where the chain will sit on the bike. This will help ensure that the new chain goes on smoothly.

Next, thread the new chain through the rear derailleur and around the gears. Be careful not to cross the chain over itself, as this can cause it to break.

Once the chain is in place, use the chain tool (or multi-tool) to connect the two ends of the chain.

Finally, check that the chain is tight by pedaling the bike and shifting through the gears. If the chain feels loose, use the chain tool to tighten it. Now you’re ready to ride!

What Are the Different Types of Bike Chains?

There are three types of bike chains: single-speed, multi-speed, and BMX.

  • Single-speed chains are the simplest type, and they’re compatible with most BMX bikes.
  • Multi-speed chains are more complex, and they’re designed for use with derailleur systems.
  • BMX chains are the strongest type, and they’re necessary for riding on rough terrain.

To identify which type of chain you have, look at the number of cogs on your rear cassette. If you have a single-speed bike, you’ll see only one cog.

If you have a multi-speed bike, you’ll see two or more cogs. And if you have a BMX bike, you’ll see either one or two cogs, depending on the model.

Once you know which type of chain you have, it’s important to choose the right size. Single-speed chains are available in 8-, 9-, and 10-speed sizes.

Multi-speed chains are available in 8-, 9-, 10-, and 11-speed sizes. And BMX chains are available in 8-, 9-, 10-, and 11-speed sizes.

To determine the right size chain for your bike, count the number of teeth on your largest cog. If you have an 8-speed cog, you’ll need an 8-speed chain. If you have a 9-speed cog, you’ll need a 9-speed chain. And so on.

Now that you know the different types of bike chains and how to identify which one you have, it’s time to choose the right size chain for your bike. By doing so, you’ll ensure that your bike runs smoothly and efficiently.

How Do You Remove a Bike Chain from The Bike’s Gears and Derailleur System?

If your bike chain is starting to feel loose, or if the gears are slipping, it’s probably time to remove the chain and clean it. Luckily, this process is relatively simple, and only requires a few basic tools.

How Do You Remove a Bike Chain from The Bike's Gears and Derailleur System

First, you’ll need a chain tool. This is a small hand-held device that is specifically designed for removing and installing bike chains. You can find chain tools at most bike shops, or online.

Next, you’ll need to remove the rear wheel of your bike. Most bikes have a quick-release lever on the axle, which allows you to remove the wheel without any tools.

If your bike doesn’t have a quick-release lever, you’ll need a wrench to loosen the axle nuts.

Once the rear wheel is removed, gently rotate the pedals until the chain is in the smallest gear at the front, and the largest gear at the back. This will make it easier to remove the chain.

Place the chain tool on one of the links, and use it to push the pin out of the link. You may need to use a little force, but be careful not to damage the link. Repeat this process until the chain is removed.

Once the chain is off, you can clean it with a degreaser and a brush. If the chain is particularly dirty, you may need to soak it in degreaser overnight. Once it’s clean, dry it off and lube it with a quality bike chain lube.

To reinstall the chain, simply reverse the process. Place the chain on the gears, and use the chain tool to push the pins back into the links. Make sure that the chain is tight before you reinstall the rear wheel.

With a little practice, removing and installing a bike chain is a relatively easy process. Just be sure to take your time, and be careful not to damage the chain or gears.

How to Put a Bike Chain Back On?

  • First, identify which link on the chain came off. This is usually the one that is the most stretched out.
  • Next, use a chain tool to push the pin out of the link.
  • Once the pin is removed, you can take the link off of the chain.
  • To put the link back on, line up the pinholes and use the chain tool to push the pin back through.
  • Make sure that the link is fully seated before you ride your bike again. Otherwise, the chain could come off while you’re riding.

If you don’t have a chain tool, you can also remove and replace the link using a pair of needle-nose pliers. Just be careful not to damage the link or the chain while you’re doing this.

Tips or Tricks to Put a Bike Chain Back on Faster

Unfortunately, there is no one definitive answer to this question. Every individual has their own unique set of skills and experiences that they bring to the table when it comes to writing.

However, there are a few general tips and tricks that can help make the writing process easier and faster for everyone.

One of the most important things to do when writing is to plan and organize your thoughts before you start putting pen to paper (or fingers to keyboard).

This will help you save time in the long run by ensuring that you know exactly what you want to say before you start writing. It also helps to prevent writer’s block, which can be a huge time-waster.

Another helpful tip is to keep a dictionary and thesaurus on hand so that you can quickly look up words that you are unsure of. This will help to ensure that your writing is error-free and also help you to expand your vocabulary.

Finally, try to set aside a specific amount of time each day to write. This will help you to stay on track and make consistent progress on your writing project.

By following these tips, you should be able to write more efficiently and effectively. However, remember that everyone has their own individual writing style and process, so don’t be afraid to experiment until you find what works best for you.

Final Thoughts

Actually, everything you need to know about how to put a bike chain back on. It’s not as hard as it might seem, but it is important that you take your time and get the process right.

Just by following a simple guide, you should be able to get your bike chain back on in no time at all. It may seem daunting the first time, but with a little practice, you’ll be able to do it like a pro.

And if all else fails, remember that there are plenty of videos online that can walk you through the process step-by-step.

Have you tried putting your bike chain back on yourself? What tricks or tips do you have for the process? Let us know in the comments section below.

Miguel Watts

Miguel is an automobile engineer, who works in his automobile workshop. He is in this track for almost fifteen years, so he has vast experience with automobile tools and accessories. Besides this profession, he’s a hobbyist blogger who loves to research different tools and accessories of cars, motorbikes, automobiles, etc., and shares his findings with others. The Toolsinsider is a result of that. Miguel creates this site to share his findings with a broader audience.

Leave a Reply

Your email address will not be published. Required fields are marked *

Recent Posts