How to Connect Bike Chain without Tool?

Bicycles are a fun form of transportation, and they can also be a great source of exercise. If you’re new to cycling, it’s important to know how to take care of your bike, including how to connect the chain.

You don’t need any tools to do this – just follow these simple steps!

There are a few ways to connect a bike chain without a tool. One way is to pedal the bike backwards and use the motion of the pedals to automatically connect the chain. 

Another way is to use your hands to twist the two ends of the chain together.

Lastly, you can also buy a special connectors that don’t require any tools.

How to Connect a Bike Chain without A Tool?

If you don’t have a chain tool, you’ll need a few other tools to get the job done. You’ll need two wrenches (one to hold the derailleur cage, and one to turn the crank), a pair of needle-nose pliers, and some grease.

How to Connect Bike Chain without Tool

You may also need a chain link removal tool, depending on the type of chain you have.

  • To start, shift your bike into the smallest cog on the rear cassette and the largest ring on the front crankset. This will give you the most slack in the chain, making it easier to remove.
  • Next, use one of your wrenches to hold the derailleur cage in place while you use the other wrench to turn the crank counter-clockwise. This will cause the chain to come off of the front ring.
  • Once the chain is off of the front ring, you can remove it from the rear cassette.

To do this, shift your bike into the largest cog on the rear cassette and then use your needle-nose pliers to remove the master link (or whatever type of link you have) from the chain.

With the chain off of the bike, you can now begin greasing it. You’ll want to put a generous amount of grease on all of the exposed metal parts, especially the rollers and pins.

Once you’ve got the chain greased up, you can start re-assembling it.

  • To put the chain back on the bike, you’ll need to start by threading it through the rear derailleur.
  • Then, shift your bike into the smallest cog on the rear cassette and the largest ring on the front crankset (just like before). This will give you enough slack to easily connect the chain.
  • To connect the chain, you’ll need to line up the ends of the chain and then use your needle-nose pliers to connect them.
  • Once the chain is connected, you can shift your bike back into whatever gear you were in before and start riding!

The steps involved in connecting a bike chain without a tool are:

  1. Remove the old chain from the bike.
  2. Unhook the old chain from the derailleur.
  3. Pull the old chain through the frame.
  4. Cut the new chain to length.
  5. Connect the new chain to the derailleur.
  6. Run the new chain through the frame.
  7. Connect the two ends of the chain.
  8. Adjust the chain tension.
  9. Test ride the bike to make sure the chain is secure.

If you have any questions about connecting a bike chain without a tool, please feel free to ask in the comments below and we will be happy to help!

The Benefits of Connecting Your Bike Chain without A Tool

The benefits of connecting your bike chain without a tool are numerous.

  • For one, it saves you time and hassle by eliminating the need to fumble with a chain tool every time you want to ride.
  • Additionally, it can prolong the life of your chain by preventing premature wear and tear.
  • Finally, by not having to remove your chain every time you ride, you’ll also help keep your drivetrain clean and free of dirt and grime.

All in all, connecting your bike chain without a tool is a smart move that will save you time, extend the life of your chain, and keep your drivetrain clean.

With all of these benefits, it’s no wonder that more and more cyclists are choosing to forgo the chain tool and go sans-tool.

So if you’re looking to save time, extend the life of your chain, and keep your drivetrain clean, ditch the chain tool and go sans-tool. Your bike will thank you!

The above content is an example of the type of information that you could use to write your own original content.

Tips for Making a Bike Chain without A Tool

If you don’t have a chain tool handy, there are a few ways you can still remove and install a new bike chain. One way is to use a pair of pliers to gently push out the old pins. You can also use a hammer to lightly tap out the old pins.

Tips for Making a Bike Chain without A Tool

Once the old pins are removed, you can thread the new chain through the derailleurs and around the sprockets.

Then, use a pair of pliers or a hammer to tap in the new pins. Be sure to line up the pinholes before tapping them in, so that the chain doesn’t come off while you’re riding.

With a little bit of patience, you can replace your bike chain without a chain tool. Just be sure to take your time and be careful not to damage the new chain.

What Type of Bicycle Lubricant Should I Use?

There are a few different types of lubricants that can be used on bicycles, and the type you use will depend on a few factors.

If you’re just looking to lube up your chain after connecting it without the tool, any kind of bicycle-specific lubricant should do the trick.

However, if you’re looking to prevent rust and corrosion, you’ll want to use a lubricant that is specifically designed for that purpose.

If you’re not sure what type of lubricant to use, or if you’re looking for the best possible option, it’s always best to consult with a bicycle mechanic or other expert.

They’ll be able to recommend the best lubricant for your needs, and they can also help you troubleshoot any problems you’re having with your bike.

Conclusion

Although it’s not as simple as clicking a few buttons on your cell phone, connecting a bike chain without a tool is definitely doable with a little practice.

We hope you found this guide helpful and that you have safe and enjoyable rides ahead!

How did this tutorial work for you? Did you have any trouble following along or completing the steps?

Let us know in the comments below and we would be happy to help out.

Miguel Watts

Miguel is an automobile engineer, who works in his automobile workshop. He is in this track for almost fifteen years, so he has vast experience with automobile tools and accessories. Besides this profession, he’s a hobbyist blogger who loves to research different tools and accessories of cars, motorbikes, automobiles, etc., and shares his findings with others. The Toolsinsider is a result of that. Miguel creates this site to share his findings with a broader audience.

Leave a Reply

Your email address will not be published. Required fields are marked *

Recent Posts