Can You Put A Tube In A Tubeless Tire?

If you’re like me, you’ve probably wondered at least once if it’s possible to put a tube in a tubeless tire.

I mean, they’re both round objects, so why wouldn’t it work? And sure enough, there are plenty of videos on YouTube showing people doing just that. But does it really work?

Yes, you can put a tube in a tubeless tire. You will need to remove the tire from the wheel and then deflate the tire. Remove the valve stem cap and place the small end of a tube onto the valve stem.

Inflate the tube until it is firm and then place the tire back on the wheel. Make sure that the bead of the tire is seated properly all the way around before inflating further.

It may be necessary to use soapy water or a commercial bead sealant to get the bead of the tire to seat properly.If everything is done correctly, you should be able to ride your bike with a tube in a tubeless tire without any problems.

What Makes Tubeless Tires Different From Tube Tires?

Tubeless tires are made without an inner tube, which means they can be used on a wider variety of terrain. They’re also more puncture resistant and provide a smoother ride. Here’s a closer look at the key differences between tubeless and tube tires:

  • Tubeless tires don’t have an inner tube, so they can be used on a wider variety of terrain.
  • More puncture resistant and provide a smoother ride.
  • More susceptible to flats, so they’re not ideal for off-road riding.
  • Tube tires are also heavier than tubeless tires, which can make them more difficult to install.

If you’re looking for a more versatile tire that can handle a variety of terrain, then tubeless is the way to go. And if you’re looking for a tire that’s lighter and easier to install, then tube tires are the better option.

Whichever route you choose, just make sure you know the key differences between tubeless and tube tires before making your final decision.

Can You Put A Tube In A Tubeless Tire?

The answer is yes, you can put a tube in a tubeless tire. While it’s not the ideal way to run a tubeless tire, if you find yourself in a pinch, it can be done.

Can You Put A Tube In A Tubeless Tire

Just be aware that it’s not going to be as safe or as reliable as running a tubeless tire without a tube. Here’s how you do it:

  • Remove the valve stem from the tubeless tire.
  • Insert the tube into the tire.
  • Replace the valve stem.
  • Inflate the tire to the recommended pressure.
  • Check the tire regularly for leaks.

Keep in mind that this is a temporary fix and you should plan on replacing the tubeless tire as soon as possible. But if you’re in a bind, this will get you by.

What Happens If You Put A Tube In A Tubeless Tire?

If you’ve ever wondered what would happen if you put a tube in a tubeless tire, wonder no more! We’ve got the scoop on what happens if you make this seemingly innocent mistake.

When you put a tube in a tubeless tire, the tube will eventually start to leak air. This is because the tube is not designed to seal against the tire like a tubeless tire is. As the air leaks out, the tire will start to sag and eventually go flat.

If you try to pump up the tire again, you’ll probably find that the tube has come unseated from the rim and is now sitting in the bottom of the tire.

You can usually get the tube reseated by deflating the tire and then inflating it again. But once the tube is unseated, it’s likely to leak air again.

So what’s the bottom line? If you put a tube in a tubeless tire, expect to deal with a flat tire sooner or later. It’s just not worth the hassle to try and make it work. Stick with tubeless tires and save yourself the headache!

Considerable Things While Inserting Tubes In Tubeless Tires?

  • It is always essential to check the bead seats of the tubeless tire and rim. If they are damaged, it can cause air leaks.
  • Before inserting the tube, put a liberal amount of talcum powder on the inside of the tire. This will help to prevent the tube from sticking to the tire.
  • When inserting the tube, be careful not to pinch it. Pinching the tube can cause air leaks.
  • Make sure that the valve stem is pointing up when you inflate the tire. If it is pointing down, air will leak out of the valve stem.
  • After inflating the tire, check all around the bead seat for any air leaks. If you find an air leak, deflate the tire and try again.

How To Insert Tubes Inside Tubeless Tires?

The process of inserting tubes into tubeless tires is not as difficult as it may seem at first. In fact, it is quite simple and only requires a few tools and materials. Here is a step-by-step guide on how to insert tubes into tubeless tires:

How To Insert Tubes Inside Tubeless Tires

Step 1: Start by removing the tire from the wheel. You will need to deflate the tire completely before you can remove it.

Step 2: Once the tire is removed, locate the hole in the rim where the valve stem is located.

Step 3: Insert one end of the tube into the hole in the rim. Make sure that the tube is fully seated in the hole.

Step 4: Inflate the tube slightly so that it holds its shape.

Step 5: Place the tire back on the wheel and inflate it to the desired pressure.

Now that you know how to insert tubes into tubeless tires, you can easily get the job done yourself. Just follow these simple steps and you will have no trouble at all.

Pros and Cons Of Using Tubeless tires


  • Tubeless tires can provide a smoother ride because they absorb shock better.
  • They typically have lower rolling resistance, which can lead to improved fuel economy.
  • It’s easier to repair a puncture in a tubeless tire since you don’t have to remove the entire tire from the wheel.


  • Tubeless tires can be more expensive than traditional tires.
  • It can be more difficult to install tubeless tires.
  • You may need special equipment to mount tubeless tires on your vehicle.


Tubeless tires are growing in popularity and for good reason. They’re easier to maintain, provide a smoother ride, and can be run at lower pressures. But what if you get a flat?

Can you put a tube in a tubeless tire? The answer is yes, but it’s not as easy as just popping the old one out and putting the new one in. There are a few tricks you need to know before you start fiddling with your tires.

So, if you do happen to get a flat while riding on tubeless tires, don’t panic! With a little bit of know-how, you can easily fix the problem and be back on your way.

Miguel Watts

Miguel is an automobile engineer, who works in his automobile workshop. He is in this track for almost fifteen years, so he has vast experience with automobile tools and accessories. Besides this profession, he’s a hobbyist blogger who loves to research different tools and accessories of cars, motorbikes, automobiles, etc., and shares his findings with others. The Toolsinsider is a result of that. Miguel creates this site to share his findings with a broader audience.

Leave a Reply

Your email address will not be published. Required fields are marked *

Recent Posts